Skip to content

How to Clean Meta Glasses Without Damaging Them

By AR Compare Team ·

Clean Meta glasses with a soft cloth dampened with water and a little mild soap, then dry them before they go back in the case. Meta says to avoid alcohol and solvents, which most lens sprays contain, and never to hold the glasses under running water.

These are Meta’s own steps from its care and cleaning help page, read November 17, 2026. They apply to Ray-Ban Meta, Oakley Meta and the Meta Glasses line. For the full range, see the Meta glasses guide.

Step by step

  1. Dampen a clean, soft cloth with water and a drop of mild soap.
  2. Gently wipe the lenses.
  3. Wipe the small camera lens on the front of the frame.
  4. Wipe the gold charging contacts on the nose bridge.
  5. Dry everything with a clean cloth before you wear the glasses or put them in the case.

Store the glasses in their charging case when you’re not wearing them. Meta recommends it to protect them from drops and scratches.

What not to use

AvoidWhy
Alcohol or solvent lens cleanersMeta says to avoid all solvents and alcohol
Dirty or rough clothsMeta says they can change the lens surface
Running waterMeta says not to hold the glasses under the tap

The one exception: on the Meta Ray-Ban Display, Meta also allows alcohol-free lens spray or lens wipes.

Clean the charging contacts if they won’t charge

Dried sweat and dirt on the contacts are a common reason glasses stop charging. Meta’s fix is to take the glasses out, then clean the gold contacts on the glasses and inside the case with a dry, lint-free cloth or a cotton swab (Meta’s charging help page). Then dock them again and check the light. More fixes are in Meta glasses not charging.

Clear muffled speakers on the Oakley Meta Vanguard

The Oakley Meta Vanguard has speaker screens that can clog with sweat and grime. Meta’s method:

  1. Put a few drops of clean water on the top speaker screens so the water covers each screen.
  2. Lay the glasses flat with the arms open and the top screens facing up.
  3. Wait 15 minutes.
  4. Clean off the loosened residue with a microfiber cloth or a soft toothbrush.
  5. Turn the glasses over and repeat for the bottom screens.

After it gets wet

Meta glasses are not waterproof. If they get caught in rain, dry them fully before they go in the case. See are Meta glasses waterproof for each model’s rating. If you are shopping, the Ray-Ban Meta (Gen 3) is the current everyday pair and the Vanguard is the one built for sweat; Oakley Meta Vanguard vs Ray-Ban Meta (Gen 3) sets them side by side.

Frequently asked questions

Can I use lens cleaner spray on Meta glasses?

Not on most models. Meta says to avoid solvents and alcohol, which common lens cleaners contain. Meta allows alcohol-free lens spray or wipes only on the Meta Ray-Ban Display.

Can I rinse Meta glasses under the tap?

No. Meta says not to hold the glasses under running water, even the IP67 Oakley Meta Vanguard.

How do I clean the camera lens?

Wipe it gently with the same damp cloth and mild soap you use on the lenses, then dry it. A smudged camera lens is the usual cause of hazy photos.

My glasses stopped charging. Could dirt be the cause?

Yes. Meta says dried sweat, dirt and liquid on the gold charging contacts can stop the glasses charging. Clean the contacts on the glasses and in the case with a dry, lint-free cloth or cotton swab.

How do I fix muffled sound on the Oakley Meta Vanguard?

Meta's fix: put a few drops of clean water on the speaker screens, let it sit for 15 minutes, then clean off the loosened residue with a microfiber cloth or soft toothbrush. Do the top screens, then the bottom.

Ready to buy?

Alternatives to the picks above